This is a picture of the front of the finished projector from a slight angle.	This is a picture of the finished projector from the side.	This is a picture of the inside of the projector from the back. Ballast, A/C adaptor, fan, and air intakes are visible.	This is another picture of the rear internals of the finished projector, more prominently displaying the internal components.	This is another picture of the finished projector from the side with the rear access panel open.
This is a picture of the finished projector from the top with the rear access panel open. The air intake nozzles, fan, and bulb can be seen.	This is another picture of the rear of the finished projector with the rear access panel open. The bulb can be seen in more detail and the burn mark behind the bulb can be seen clearly.	This is yet another picture of the rear of the finished projector from the top with the rear access panel open.	This is still another picture of the rear of the finished projector from the top. The ballast and A/C adapter can be seen partially.	This is a picture of the finished projector from the top.
This is a picture of the finished projector from the top with the top access panel removed.	This is a picture of the finished projector from the top with the top access panel removed and the masking cardboard in place.	This is a picture of the finished projector from the top with the top access panel removed. From back to front (top to bottom on in the picture) the 1/4" thick sheet of IR glass, a 1/8" thick sheet of Fresnel lens, the 1/8" thick sheet of UV glass, the LCD panel, and another 1/8" thick sheet of Fresnel lens.	This is a picture of the (not quite) finished projector from the side, showing the power port with unsanded edges. These defects were added after I took control of the projector from the expert woodworker.	This is yet another picture of the back of the projector with the rear access panel open.
This is another picture of the back of the projector with the rear access panel open. The exhaust pipes are prominently displayed.	This is a close-up picture of the 250W HQI bulb.	This is a close-up picture from the inside of the finished projector of the exhaust nozzles.	This is another close-up picture from the inside of the finished projector of the exhaust nozzles.	This is yet another close-up picture from the inside of the finished projector of the exhaust nozzles. All three ports can be seen in this picture.
This is a picture of the finished projector from the front.	This is a close-up of the finished projector from the front.	This is another picture of the finished projector from the side with the rear access panel open.	This is another picture from the back of the finished projector with the rear access panel open.	This is a picture of the finished projector with the rear access panel open. Implements of destruction are scattered about nearby.
This is a picture of me holding a 2.75-inch wood-saw drill bit in place.	This is a picture of me demonstrating what the end result of adding the air hoses should look like.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.	This is a picture of the projector being modified.
This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.
This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.
This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of image being projected onto the screen.	This is a picture of the projector partially painted.	This is a picture of the projector partially painted.
This is a picture of the projector partially painted.	This is a picture of the projector partially painted.	This is a picture of the projector partially painted.	This is a picture of the projector partially painted.	This is a picture of the projector partially painted.
This is a picture of the projector partially painted.	This is a picture of the projector partially painted.